Welcome to our websites!

Electrical insulation suit

Short Description:

Electrical insulation suit


Parameter

Performance

Instruction

Video

Product Tags

1. It is used for whole body protection when working in high voltage places;
2. Protective clothing that can be used for emergency rescue in live fire accidents with rated voltage of 10kV and below;
3. The electric insulating clothing is made of three layers, the outer layer and the inner layer are flame retardant rubber cloth, and the middle layer is polymer insulation film.
4. The electrical insulation fittings include: electric insulating clothing, insulating boots and insulating gloves.
5. There is no stain, bubble, open glue and damage on the surface of clothing.
6. Electric insulating gloves are made of natural rubber after special treatment, with soft texture and five finger design.
7. Electric insulating boots are made of high pressure resistant rubber.
Technical performance
1. Electrical insulating clothing
(1) Mass ≤ 3.4kg; (2) pressure resistance: no flashover, breakdown and heating phenomenon; (3) tensile strength: longitude ≥ 1200n, latitudinal ≥ 700n; (4) tearing strength: meridional ≥ 65N, latitudinal ≥ 50N; (5) heat aging performance: not sticky and brittle; (6) cold resistance: no crack. (7) Gasoline resistance: no crack, no stickiness.
2. Insulating boots
(1) The results showed that: (1) the anti-skid property of the upper part should be more than or equal to that of the upper part; (2) the anti-skid property of the upper part should be greater than or equal to that of the upper part; (2) the anti-skid property of the upper part should be greater than or equal to that of the upper part; (2) the anti-skid property of the upper part should be greater than or equal to that of the upper part; (2) the anti-skid property of the upper part should be greater than or equal to that of the upper part; (2) the upper part should not have the function of anti-skid; (2) the upper should have;
3. Insulating gloves
(1) The results show that the average tensile strength is more than 23mpa, and the average elongation at break is ≥ 646%; (2) the tensile permanent deformation is ≤ 3%; (3) the voltage value at breakdown shall not be less than 44kv; (4) the verification voltage is 12kV and kept for 3min. The leakage current is ≤ 19ma; the verification voltage is 22kv, and it is kept for 3min. There should be no breakdown. (5) According to the requirements of 6.6.1, the flame shall exit after combustion for 10s, and it shall be ensured that there is no air flow interfering with the test flame. After the gas lamp exits, observe the flame spread for 55s. At this time, the flame shall not spread to the reference line.


  • Previous:
  • Next:

  • The product has the properties of flame retardant, heat resistance, aging resistance and pressure resistance.

    Application: body protection during hot-line work. Flame retardant and insulating. It can withstand high voltage below 7,000V.

  • Write your message here and send it to us